Helluva Boss - OFFICIAL STORE

20" x 29" (510mm x 735mm) 1000 Piece jigsaw puzzle once assembled.  Vivziepop Store

Read more less

24" x 14" Embroidered Edged playmat.  Design by MissPanica, Background credit to: Jasper Luu, Leslie Erkocevic, and Amanda Heard Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customerDesign by Kanomareki *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Fizzarolli Beelzebub Mammon Ozzie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by Par0lllel

Read more less

Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

  The front will have a I.M.P Halloween pattern, while the back is a solid orange. Design by zllm6.   50" x 60" 100% Polyester Fleece Blanket

Read more less

Design by CyberCyber Pins are approximately 1.5 inch tall. Enamel material. Limit 3 per customer  

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customerDesign by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

12 x 9 inch double-sided blackout fabric wall hanging banner.   

Read more less

Design by DisasterLady Pins are approximately 1.5 inch tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Pins are approximately 1.5 inches. Hard Enamel and lenticular effect.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Pins are approximately 1.5 in tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image. Design by Kstoooone

Read more less

Design by Kain Pins are approximately 1.5 in wide.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

2 sticker pack. 3 in tall. 

Read more less

Design by Mist Mistly *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

80 unlined pages.  Size: 6in x 8.5 in Design by JaneGumball and thejonkay Vivziepop Store  

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Voidseeker Limit 3 per customer 3 in. acrylic keychains. *NOTE* There is a protective film wrap that can be removed.

Read more less

Printed on 16"x20" Premium Luster Photo Paper with Archival Quality Inks.  Mockups are of the 16"x20" size. Design by MissPanica, Background credit to: Jasper Luu, Leslie Erkocevic, and Amanda Heard Posters are made-to-order and can not be exchanged or refunded. Posters are shipped separately from other products to prevent damage. 

Read more less

Pins are approximately 1 in wide. Enamel material. 

Read more less

**THIS ITEM IS ON PRE-ORDER** WE EXPECT THE PLUSH TO SHIP JUNE 2025 ONCE THEY ARRIVE. NOTE: DUE TO THE LENGTH OF THE PRE-ORDER, WE WILL NOT BE ACCEPTING ORDERS FOR OTHER SITE ITEMS WITH PURCHASE OF YOUTOOZ PLUSHIES. THANK YOU FOR YOUR UNDERSTANDING.  The Plush Now what could Vox want with Youtooz? I mean, he seems legit! Let’s hear him out, I’m sure nothing bad could come of it! Sitting at 9 inches tall with a huge blue jagged smile plastered across his screen of a face beneath two deep red eyes, he raises an eyebrow menacingly as a small top hat with a pair of red antennas sits atop his rectangular head. Dressed for business and always dapper, he wears a teal-striped navy tux with its tails flicking out to the sides over a striped red and black shirt as a bowtie rests at his neck. This plush is packed to the seams with 100% PP cotton and is made of the softest minky material, absolutely perfect for cuddling or manipulating people's minds with! About Hazbin Hotel Hazbin Hotel is an animated musical series created by Vivienne "VivziePop" Medrano which follows Charlie Morningstar, the princess of Hell, in her goal to ‘rehabilitate’ sinners to allow them to enter heaven via her ‘Hazbin Hotel’. With the pilot initially releasing on YouTube in 2019, the first season premiered on Amazon Prime Video in 2024, seeing the largest debut for a new animated series on the platform! © 2024 Amazon Content Services LLC and A24 Films LLC.

Read more less

Pins are approximately 1 in wide. Enamel material. 

Read more less

10 oz glass. For maximum life of the imaged product, we recommend hand washing. Design by TravisPixels NOTE: DUE TO THE FRAGILE NATURE OF THE MAI TAI GLASS, THEY WILL BE SHIPPED SEPARATELY.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Blitz Loona Striker Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

 1.5 oz shot glass. Laser Engraved. Vivziepop Store

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customerDesign by Kanomareki *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

12 x 9 inch double-sided blackout fabric wall hanging banner. 

Read more less

Design by Hunter Braly and Jeff Delgado 3D Lenticular Poster 11.5"x15.5" size.  Frame is not included. Lenticular Posters are shipped separately from other products to prevent damage. 

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customerDesign by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal. Character is double-sided.  

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Beelzebub Fizzarolli Mammon Ozzie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Design by Disaster Lady *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Sizing Charts

Read more less

Design by MistMistly. Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by MistMistly. Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less