Helluva Boss - OFFICIAL STORE

**THIS ITEM IS ON PRE-ORDER** WE EXPECT THE PLUSH TO SHIP NOVEMBER 2024 ONCE THEY ARRIVE. NOTE: DUE TO THE LENGTH OF THE PRE-ORDER, WE WILL NOT BE ACCEPTING ORDERS FOR OTHER SITE ITEMS WITH PURCHASE OF YOUTOOZ PLUSHIES. THANK YOU FOR YOUR UNDERSTANDING.  Charlie knew we needed a little extra muscle here at Youtooz, so she sent Razzle along for their plush debut to help out! Sitting at 9 inches tall with their hooved feet kicked out wide as a small hand rests at their front and lead up to their tuxedo’d black and white chest as a bright red bowtie sits at their neck, a pair of huge yellow and red eyes absolutely beam out from their creme colored face as a thin smile rests in the middle rosy round cheeks. With long curling black and red striped horns stretching out from the top of their head on either side of a light red puff of hair and a pair of sharp wings extending from their back, a long black pointed tail wraps around from their back. This plush is packed to the seams with 100% PP cotton and is made of the softest minky material, absolutely perfect for cuddling or being the perfect bodyguard!

Read more less

Pins are approximately 1.5 inches. Hard Enamel and lenticular effect.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Set of 8 vinyl waterproof die-cut stickers - around 3" each.  Design by Levendarice

Read more less

Design by GasuGuma. Vivziepop Store 24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. PLEASE ALLOW 1-2 WEEKS FOR PRINTING. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final** 

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  Limit 3 per customer *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Design by CalMoray. Dimensions - 4.5" by 7" Material - Polyester

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  Limit 3 per customer *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

80 unlined pages.  Size: 6in x 8.5 in Design by JaneGumball and thejonkay Vivziepop Store  

Read more less

**THIS ITEM IS ON PRE-ORDER** WE EXPECT THE PLUSH TO SHIP NOVEMBER 2024 ONCE THEY ARRIVE. NOTE: DUE TO THE LENGTH OF THE PRE-ORDER, WE WILL NOT BE ACCEPTING ORDERS FOR OTHER SITE ITEMS WITH PURCHASE OF YOUTOOZ PLUSHIES. THANK YOU FOR YOUR UNDERSTANDING.  Of course we couldn't let Razzle come in for his Youtooz debut without Dazzle comin' along too! Sitting at 9 inches tall with his hooved feet kicked out wide as small hand rest at their front and lead up to their tuxedoed black and white chest as a bright red bowtie sits at their neck, a pair of huge yellow and red eyes absolutely beam out from their creme colored face as a sharp smile rests in the middle of rosy round cheeks. With long curling black and red striped horns stretching out from the top of his head on either side of a dark red puff of hair and a pair of sharp wings extending from his back, a long black pointed tail wraps around from their back. This plush is packed to the seams with 100% PP cotton and is made of the softest minky material, absolutely perfect for cuddling and being your backup whenever needed!

Read more less

Design by Cal Moray. Dimensions - 4.5" by 7" Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard. 

Read more less

Design by par0llel Sizing Charts

Read more less

1000 Piece jigsaw puzzle 20" x 29" (510mm x 735mm) once assembled.  Design by madelezabeth. Vivziepop Store

Read more less

Design by zllm6 Approximately 1.25" x 2.5" x 3" when assembled *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS.  PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by VoidSeeker_ Sizing Charts

Read more less

Large size socks and will fit most. Measured at approx. 16in tall x 3in wide. Might shrink in first wash.  Socks are 65% Cotton, 3% Spandex, 32% Polyester. Wash with Dark Colors separately.  Design by TravisPixels  VivziePop Store

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by Lavendarice Pins are approximately 1.5 in tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

16 oz glass. Laser Engraved. NOTE: DUE TO THE FRAGILE NATURE OF THE PINT GLASS, THEY WILL BE SHIPPED SEPARATELY.

Read more less

80 unlined pages.  Size: 6in x 8.5 in Design by JaneGumball and thejonkay Vivziepop Store  

Read more less

  **THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by par0llel. Sizing Charts

Read more less

~5 inch Acrylic charm. Design by madelezabeth. *NOTE* There is a film protection wrap that can be removed.

Read more less

Approximately 3.5 in. enamel keychain. Design by Radvumtal.  

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON  NOVEMBER 26th. PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by GasuGuma.  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Design by Sera Pins are approximately 1.5 in wide.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by Sera Pins are approximately 1.5 in wide.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

100% Polyester.  Design by Circlehead  PULLOVER HOODIE Sizing Chart:   

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Blitz Loona Millie Moxxie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel.

Read more less

Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed. Design by JaneGumball.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Beelzebub Fizzarolli Mammon Ozzie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Design by zllm6 Approximately 1.25" x 2.5" x 3" when assembled *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Octavia Stolas Human Loona Verosika Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel.

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by voidseeker_  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by CybeR. *For Ladies-fitted shirts and 7X-10X Shirts, they will only be available during the Pre-Order period. After which they will not be printed again.* Sizing Charts

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less