VivziePop

Pin will be approximately 3 inches wide by 1.6 inches tall. Sun/moon rotates! Design by Vee

Read more less

Design by GasuGuma, title art by IdentityPollution. *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

**THIS ITEM IS ON PRE-ORDER** PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by VoidSeeker_ Sizing Charts

Read more less

Design by MissPanica  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Design by Onyx  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are made using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

**THIS ITEM IS ON PRE-ORDER**  PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Onyx Printed on 16"x20" Premium Luster Photo Paper with Archival Quality Inks.  Mockups are of the 16"x20" size.  Posters are made-to-order and can not be exchanged or refunded. Posters are shipped separately from other products to prevent damage. 

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON OCTOBER NOVEMBER 25th. PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by MissPanica Printed on 16"x20" Premium Luster Photo Paper with Archival Quality Inks.  Mockups are of the 16"x20" size.  Posters are made-to-order and can not be exchanged or refunded. Posters are shipped separately from other products to prevent damage. 

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Octavia Human Loona Stolas Verosika Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Verosika Octavia Human Loona Stolas Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Verosika Stolas Octavia Human Loona Cards are Silver with Gold accents and come in a folding card pack. Cards measure 2" by 3.5" Design by Par0llel

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  Limit 3 per customer *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Blitz Loona Striker Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Blitz Striker Loona Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

80 Lined pages.  Size: 6in x 8.5 inDesign by TravisPixels Vivziepop Store  

Read more less

80 unlined pages.  Size: 6in x 8.5 inDesign by TravisPixels Vivziepop Store  

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by zllm6.

Read more less

100% Polyester.  Design by Circlehead  PULLOVER HOODIE Sizing Chart:   

Read more less

Necklace is approx. 1.25 inches. Zinc alloy material. 26 inch necklace length.  Design by thejonkay

Read more less

Design by Cal Moray. Dimensions - 4.5" by 8" Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard. 

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Octavia Stolas Human Loona Verosika Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel.

Read more less

80 unlined pages.  Size: 6in x 8.5 in Vivziepop Store  

Read more less

Set of 3 Moxxie-themed vinyl waterproof die-cut stickers.  approx. 3.5" tall each. Design by AzulBun Vivziepop Store

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Verosika Octavia Human Loona Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Pins are approximately 1 in wide. Enamel material.  Design by gigaseraph. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Vivziepop Store  Pins are approximately 1 in wide. Enamel material.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Set of 4 vinyl waterproof die-cut stickers. Featuring, Octavia, Human Loona, Stolas, and Verosika.  Approx. 4.5" tall each. Design by Pandaleafs. Vivziepop Store

Read more less

Height 6.7" Sometimes you just need a reminder that, no matter what, Stolas isn’t far away! And what better reminder than Youtooz’s brand-new night light! Sculpted to perfection by our Youtooz Imps to capture his princely essence perfectly, he kneels down with a serene face gazing into the open book that rests in his hands as thick plumage fans into points on either side of his head. This night light sits at 6.7 inches tall and is perfect to sit perched on your bedside table, desk, or anywhere that needs a little extra light! So just slap in 2 x AAA batteries, flip the switch and you’re ready to watch him illuminate with a spectacular cool blue glow that will make sure every night is just a little bit calmer!

Read more less

Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Height 4.6" x 2.3" x 3.05" “Hoot hoot” Now what could a prince of hell possibly want? Oh wait, how about a Youtooz debut! At 4.6 inches tall with thick dark plumage fanning out from their white face that has deep red eyes and a short sharp beak, their thick dark feathers sweep out to rest either side of his majestic top hat which is embellished with a gold crown. With a high white collar and shoulder caps, he raises one hand up to his ruffled collar as the other faces outward nonchalantly as a long red cloak hangs down over a red tunic with golden buttons and their feathered tail. The exterior of their packaging sees a burning silhouette against a dark background, while the interior surrounds them entirely in maroon stripes that are reminiscent of dirty wallpaper. The protective sleeve is then patterned with diagonal black and white stripes and printed with the ‘Helluva Boss’ logo as their figure can be seen through the large clear display window at its front. This collectible ships in a matte, embossed, protective outer sleeve and a custom-sized plastic protector for maximum protection during shipping.  

Read more less

Design by calmoray. Pins is approximately 3.5 in wide. Enamel and glitter material.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by CalMoray. Pins is approximately 3.5 in wide. Hard enamel, glitter and lenticular material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Designed by zllm6. 11 oz mug. Ceramic, UV Protected, FDA Compliant, Microwave and Dishwasher Safe, for maximum life of the imaged product, we recommend hand washing. Mugs are made-to-order and can not be exchanged or refunded. Mugs are using Sublimation process. Sublimation printing can cause minor printing imperfections. Mugs are shipped separately from each other to prevent damage. 

Read more less