VivziePop

Design by Lavendarice Pins are approximately 1.5 in tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Pins are approximately 1.5 in wide. Design by Sera  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Pins are approximately 1 in wide. Hard enamel material.  Design by gigaseraph. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Design by MistMistly. Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by Disaster Lady *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Kstooone *For Ladies-fitted shirts and 7X-10X Shirts, they will only be available during the Pre-Order period. After which they will not be printed again.* Sizing Charts

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Cizdude *For Ladies-fitted shirts and 7X-10X Shirts, they will only be available during the Pre-Order period. After which they will not be printed again.* Sizing Charts

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Disaster Lady *For Ladies-fitted shirts and 7X-10X Shirts, they will only be available during the Pre-Order period. After which they will not be printed again.* Sizing Charts

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Kstooone Sizing Charts  

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by CizDude Sizing Charts  

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by GasuGuma Sizing Charts  

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Kstooone  PULLOVER HOODIE Sizing Chart:    

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Cizdude    PULLOVER HOODIE Sizing Chart:   

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PRINTING WILL BEGIN AFTER THE PRE-ORDER ENDS. PLEASE ALLOW UP TO 6-8 WEEKS FOR PRINTING.  ALL LIMITED-RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Disaster Lady  PULLOVER HOODIE Sizing Chart:    

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON NOVEMBER 26th. PLEASE ALLOW UP TO 8 WEEKS FOR PRODUCTION.  11 oz mug. Ceramic, UV Protected, FDA Compliant, Microwave and Dishwasher Safe, for maximum life of the imaged product, we recommend hand washing. Design by Kstooone Mugs are made-to-order and can not be exchanged or refunded. Mugs are made using Sublimation processes. Sublimation printing can cause minor printing imperfections. Mugs are shipped separately from each other to prevent damage. 

Read more less

Design by MissPanica  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Design by Onyx  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are made using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON  NOVEMBER 26th. PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by MissPanica  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON OCTOBER NOVEMBER 25th. PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Onyx Printed on 16"x20" Premium Luster Photo Paper with Archival Quality Inks.  Mockups are of the 16"x20" size.  Posters are made-to-order and can not be exchanged or refunded. Posters are shipped separately from other products to prevent damage. 

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Moxxie Millie Loona Blitz Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Loona Blitz Moxxie Millie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Loona Blitz Moxxie Millie Cards are Silver with Gold accents and come in a folding card pack. Cards measure 2" by 3.5" Design by Par0llel

Read more less

Design by CalMoray. Dimensions - 4.5" by 7" Material - Polyester

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  Limit 3 per customer *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Features:  One size fits most, Adjustable 6 Panel Flat Bill 80% Acrylic/20% Wool Black undervisor Design by NoodleBowl  

Read more less

**THIS ITEM IS ON PRE-ORDER** THE ITEM IS EN ROUTE TO US. PLEASE ALLOW 1 MONTH FOR SHIPPING. Features: One size fits most Approx. 8 ½" Hand washable 100% Hypoallergenic Acrylic Design by NoodleBowl  

Read more less

Design by NazFX_Studios. Dimensions  - Moxxie - 7" by 16" Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard.   

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Blitz Loona Millie Moxxie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel.

Read more less

Set of 8 Summer Theme vinyl waterproof die-cut stickers.  approx. 3.5" tall each. Design by AzulBun Vivziepop Store

Read more less

Set of 3 Moxxie-themed vinyl waterproof die-cut stickers.  approx. 3.5" tall each. Design by AzulBun Vivziepop Store

Read more less

Design by PandaLeafs  Vivziepop Store  Standee is ~ 1.5" x 5.5" x 5" *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Artist: GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by zllm6 Approximately 1.25" x 2.5" x 3" when assembled *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Pins are approximately 1 in wide. Enamel material.  Design by gigaseraph. Vivziepop Store  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less