Helluva Boss - OFFICIAL STORE

Character design by MistMistly *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by Onyx  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

12 x 9 inch double-sided blackout fabric wall hanging banner.

Read more less

  Sizing Charts

Read more less

Design by Identity Pollution *NOTE* There is a protective film wrap that can be removed.

Read more less

11 oz mug. Ceramic, UV Protected, FDA Compliant, Microwave and Dishwasher Safe, for maximum life of the imaged product, we recommend hand washing. Design By zllm6.   Mugs are made using Sublimation processes. Sublimation printing can cause minor printing imperfections. Mugs are shipped separately from each other to prevent damage. 

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.Limit 3 per customer

Read more less

Design by CyberCyber Pins are approximately 1.5 inch tall. Enamel material. Limit 3 per customer

Read more less

Design by SpindleHorse *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

80 unlined pages.  Size: 6in x 8.5 in Design by JaneGumball and thejonkay Vivziepop Store  

Read more less

Design by MistMistly. Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by voidseeker 3D Lenticular Poster 11.5"x15.5" size.  Frame is not included. Lenticular Posters are shipped separately from other products to prevent damage. 

Read more less

Design by MistMistly. Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by Andrea. *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Ozzie Fizz Beelzebub Mammon Cards come in a folding card pack. Cards measure 2" by 3.5" Design by Par0lllel

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.Limit 3 per customer

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Printed on 16"x20" Premium Luster Photo Paper with Archival Quality Inks. Design by Onyx Posters are made-to-order and can not be exchanged or refunded. Posters are shipped separately from other products to prevent damage. 

Read more less

Design by  Sera Pins are approximately 1 in wide. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  Limit 3 per customer *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by Mist Mistly *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by DisasterLady Pins are approximately 1.5 inch tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less

11 oz mug. Ceramic, UV Protected, FDA Compliant, Microwave and Dishwasher Safe, for maximum life of the imaged product, we recommend hand washing. Mugs are made-to-order and can not be exchanged or refunded. Mugs are made using Sublimation processes. Sublimation printing can cause minor printing imperfections. Mugs are shipped separately from each other to prevent damage. 

Read more less

**THIS ITEM IS ON PRE-ORDER** WE EXPECT THE PLUSH TO SHIP MAY 2025 ONCE THEY ARRIVE. NOTE: DUE TO THE LENGTH OF THE PRE-ORDER, WE WILL NOT BE ACCEPTING ORDERS FOR OTHER SITE ITEMS WITH PURCHASE OF YOUTOOZ PLUSHIES. THANK YOU FOR YOUR UNDERSTANDING.  Blitzo’s back to finish the job! What job’s that you may ask? His brand new Youtooz plush of course! Sitting at 9 inches tall with a sharp evil smile stretching across his red and white face to sit underneath huge menacing eyes and angled brows, the black heart skull mark on his forehead rests between two long black and white striped horns that curve backwards. Always dressed for business, whatever business that may be, he wears a long tattered grey coat with a white collar, dark pants and red-tipped shoes as his spined tail whips around from the back. This plush is packed to the seams with 100% PP cotton and is made of a mixture of soft minky and felt materials, absolutely perfect for cuddling or taking on some contracts with!

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Loona Blitz Moxxie Millie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.Limit 3 per customer

Read more less

Features:  One size fits most, Adjustable 6 Panel Flat Bill 80% Acrylic/20% Wool Black undervisor  

Read more less

80 unlined pages.  Size: 6in x 8.5 in Design by JaneGumball and thejonkay Vivziepop Store  

Read more less

Design by Mist Mistly *NOTE* There is a protective film wrap that can be removed.

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less

  Sizing Charts

Read more less

Design by NazFX_Studios. Dimensions - 4.5" by 7" Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard. 

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL.  NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customerDesign by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal. Character is double-sided.  

Read more less

Design by Identity Pollution *NOTE* There is a protective film wrap that can be removed.

Read more less

Pins are approximately 1.5 in tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image. Design by Kstoooone

Read more less