All

**THIS IS FOR A RANDOM DESIGN, NOT FOR A QUESTION MARK PRINT** *ALL SALES ARE FINAL* At Shark Robot we silk screen every shirt ourselves. And as much as we'd like to pretend we're perfect mistakes do happen. Most of the time the mistakes are minor but at Shark Robot we won't sell anything that's any less than perfect. Until now. We're offering the opportunity to get a random mistake shirt from our warehouse. We're also mixing in some rare discontinued shirts (no mistakes on them) some extra shirts we make for other people (we print for a LOT of people once again no mistakes) or get a shirt that we honestly just made an oopsie with. The most common type of shirts are listed below. A) double print. This makes the ink a little bit blurry because we accidentally double printed the image. B) ink didn't come through the screen fully. This happens when we don't apply consistent pressure to the ink over the screen and some parts don't come though like they should. C) Wrong ink color on shirt. Sometimes when we print shirts we don't have the right ink color mixed perfectly the first time. When that happens we start over. Often the ink variation is minor. D) Too Much ink. Sometimes the ink is just really thick often due to the screen being slightly lifted from the shirt. Pretty rare though. E) Made too many of a design. These shirts won't have a "mistake" they're just extra we made that we shouldn't have. F) Discontinued shirts. Every time we clearance a shirt we usually end up with a few extra shirts in random sizes left over. G) Shirt manufacturer error. Sometimes the blank shirts we get from the manufacturer have imperfects such as a small puncture hole in the shirt. Rare. But it does happen from time to time. H) Complete mess of a mistake shirt. I doubt you'll get one of these. I don't think we've messed up a shirt "bad" for years. And if we did we'd just throw it away so no worries. Your shirt will be barely messed up. Why you want a mistake shirt. A) Perhaps you won't get a mistake shirt. It's rare but it is possible to get a shirt that's no longer being sold online. B) It's super cheap. C) it's random, which is a little bit fun. D) They're all one of a kind shirts. Mistakes usually can't be repeated, even if you tried. E) Don't like the shirt? Use if for a rag or something still decently priced.

Read more less

12 x 9 inch double-sided blackout fabric wall hanging banner. 

Read more less

Pins are approximately 1.5 in tall. Hard enamel material.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.* **All sales are final**

Read more less

Design by Voidseeker Sizing Charts

Read more less

Design by MistMistly *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Approximately 3.5 in. enamel keychain. Design by Radvumtal. **All sales are final**

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON DECEMBER 12th. PLEASE ALLOW 3-4 MONTHS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Pins are approximately 1 inch wide. Enamel material.  Design by Zone.  *Image provided is a digital mockup, may not represent the final product*

Read more less

Design by MistMistly Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

The fate of her people rests in her hands. Design by XD Threads.   

Read more less

The warrior goes through many changes but he is still the same at heart. Printed on Premium Luster Photo Paper with Archival Quality Inks.  All mockups are of the 16"x20" size.  Posters and prints are shipped separately from other products to prevent damage. 

Read more less

  Sizing Charts

Read more less

Pins are approximately 1 in wide. Enamel material. 

Read more less

  Pins are approximately 1 in wide. Enamel material.   *Pin images simulated, final pin design/colors might be slightly different than product image. Vivziepop Store **All sales are final**

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Blitz Loona Striker Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma. **All sales are final**

Read more less

Don't just wait for all your wishes to come true! Grab life by the balls! Team Four Star   

Read more less

Design by DisasterLady Pins are approximately 1 in wide. Enamel material. 

Read more less

Design by  DisasterLady Pins are approximately 1 in wide. Enamel material. 

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON DECEMBER 12th. PLEASE ALLOW 3-4 MONTHS FOR PRODUCTION. WILL NOT ARRIVE BEFORE CHRISTMAS NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Andrea Pins are approximately 1 in wide. Enamel material. 

Read more less

**THIS ITEM IS ON PRE-ORDER** PLEASE ALLOW 3-4 MONTHS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by DisasterLady Pins are approximately 1 in wide. Enamel material. 

Read more less

Design by Andrea *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Art by Derpixon.  Printed on Premium Luster Photo Paper with Archival Quality Inks.  All mockups are of the 16"x20" size.  Posters and prints are shipped separately from other products to prevent damage. 

Read more less

Plushies plays short, unique song, exclusive to the plushie!Music Track by MirronUK Design by CalMoray Dimensions - 10.5x7.5 Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard.  *Batteries are included, AND can be replaced when they run out (AAA Batteries required) **All sales are final**

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage.  **All sales are final**

Read more less

Design by CyberCyber Enamel material. Around 3" wide.

Read more less

Design by Voidseeker Limit 3 per customer *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by CalMoray. Pins is approximately 3.5 in wide. Enamel material.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Pins are approximately 1.2 inches wide. Enamel material.  ASDFMOVIE Store

Read more less

 Hit button. Get muffin. Mind the hair.  Team Four Star  

Read more less

  Design by Andrea *NOTE* There is a protective film wrap that can be removed.

Read more less

Limit 3 per customer Design by Kain Pins are approximately 1 in wide. Enamel material. 

Read more less

Design by zllm6 Pins are approximately 1 in wide. Enamel material. 

Read more less

 Features:  One size fits most, Adjustable 6 Panel Flat Bill 80% Acrylic/20% Wool Green undervisor Hats are made to order and not refundable.  Please allow for 1-2 weeks of processing time for your order.  Team Four Star 

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal. Character is double-sided.  

Read more less

Design by MistMistly Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

Limit 3 per customer Design by Kain *NOTE* There is a protective film wrap that can be removed.

Read more less