All

 Art By JMV. Helluva Boss  

Read more less

Design by JMV. Helluva Boss  

Read more less

 Art By JMV.  Helluva Boss  

Read more less

Design by Madelezabeth. Vivziepop Store  

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Loona Blitz Moxxie Millie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel.

Read more less

Design by Voidseeker. Vivziepop Store 24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. PLEASE ALLOW 1-2 WEEKS FOR PRINTING. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Design by GasuGuma. Vivziepop Store 24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. PLEASE ALLOW 1-2 WEEKS FOR PRINTING. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

1000 Piece jigsaw puzzle 20" x 29" (510mm x 735mm) once assembled.  Design by GasuGuma. Vivziepop Store

Read more less

Artist: GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

250 Piece jigsaw puzzle. 19.3" x 14.2" (49 cm x 36 cm) once assembled.  Design by SilentZound. Vivziepop Store

Read more less

Design by Cal Moray. Pins is approximately 3.5 in wide. Enamel and glitter material.  Vivziepop Store

Read more less

Bandanas are 21.5 inch x 21.5 inch, 100% cotton. Designs by smallbustudio and circleheadd.

Read more less

~3 inch Acrylic Keychain. Design by JaneGumball.  Vivziepop Store  *NOTE* There is a film protection wrap that can be removed.

Read more less

Design by zllm6. Vivziepop Store Pants has pockets and drawstring!  Printed on 95% cotton/ 5% spandex.  

Read more less

**THIS ITEM IS ON PRE-ORDER** WE EXPECT THE PIN TO ARRIVE MID/LATE APRIL 2024. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Pins are approximately 2 inches tall. Hard Enamel material.  Design by batberryboo. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Pins are approximately 1.5 in tall. Hard Enamel Material.  Design by hntrgurl13 *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Set of 6 vinyl waterproof die-cut stickers. Range from approx. 3" wide to 3.5" tall. 6 summer scenes! Featuring  Loona Moxxie and Millie Chaz Stolas and Blitz Octavia Verosika Design by NoodleBowl_Pop. Vivziepop Store

Read more less

Design by GasuGuma. Vivziepop Store 3D Lenticular Poster 11.5"x15.5" size.   Lenticular Posters are shipped separately from other products to prevent damage. 

Read more less

All 8 episode posters along with an exclusive bonus poster!  Design by GasuGuma and GlenBroganArt. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON MAY 13TH. PRODUCTION WILL BEGIN AFTER THE PRE-ORDER ENDS.  PLEASE ALLOW UP TO 4 MONTHS FOR PRODUCTION.  ALL LIMITED RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Pins are approximately 1.5 inch tall. Enamel material. Artwork by Sinnawii. *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by GasuGuma. Vivziepop Store 24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. PLEASE ALLOW 1-2 WEEKS FOR PRINTING. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final** 

Read more less

Pins are approximately 1.5 inches. Hard Enamel and glitter material.  Design by zllm6. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Designed by madelezabeth. 11 oz mug. Ceramic, UV Protected, FDA Compliant, Microwave and Dishwasher Safe, for maximum life of the imaged product, we recommend hand washing. Mugs are made-to-order and can not be exchanged or refunded. Mugs are using Sublimation process. Sublimation printing can cause minor printing imperfections. Mugs are shipped separately from each other to prevent damage. 

Read more less

Pins are approximately 1.5 in tall. Hard Enamel Material.  Design by hntrgurl13. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON MAY 13TH. PRODUCTION WILL BEGIN AFTER THE PRE-ORDER ENDS.  PLEASE ALLOW UP TO 4 MONTHS FOR PRODUCTION.  ALL LIMITED RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed. Design by GasuGuma *Keychain image simulated, final sizing might be slightly different than product image.*

Read more less

Pins are approximately 1.5 inches. Hard Enamel and printed flames.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Design by GasuGuma  Vivziepop Store  Standee is ~ 1.75" x 5" x 5" *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by hntrgurl13. Standee is ~ 1.5" x 5" x 4.5" *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Pins are approximately 1.5 inches. Hard Enamel material.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON MAY 13TH. PRODUCTION WILL BEGIN AFTER THE PRE-ORDER ENDS.  PLEASE ALLOW UP TO 4 MONTHS FOR PRODUCTION.  ALL LIMITED RUN ITEMS CAN NOT BE EXCHANGED OR REFUNDED.  ALL SALES ARE FINAL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Pins are approximately 1.5 inch tall. Enamel material. Artwork by Sinnawii. *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Pins are approximately 1.5 inches. Hard Enamel material.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Designed by zllm6. 11 oz mug. Ceramic, UV Protected, FDA Compliant, Microwave and Dishwasher Safe, for maximum life of the imaged product, we recommend hand washing. Mugs are made-to-order and can not be exchanged or refunded. Mugs are using Sublimation process. Sublimation printing can cause minor printing imperfections. Mugs are shipped separately from each other to prevent damage. 

Read more less